Quick Start Guide

Magic Balance Grip

Thank you for trusting our products and purchasing our Magic Balance Grip.

Please read this guide carefully to get the most out of your grip!

We will be grateful if you tag us on social media using the hashtag #vladbladirons, as well as mention our Instagram account – @vladbladirons

ATTENTION! When adjusting the needle depth during a session, do not continue to unscrew if the threads become visible.

To remove or install the weight(s), unscrew the screw using the wrench included in the kit. If installing only one weight, use the short screw.

The grip can be used in three configurations: with both weights, with one weight, or without weights.

A two-piece bronze weight is installed inside the grip; this allows you to change the its weight.

Weight adjustment

Sterilization

Avoid contact of the equipment with contaminated surfaces during and after sterilization.

Compatible with autoclaves, ozone sterilizers and cold sterilization methods using non-aggressive solutions with low acid or alkaline levels.

DO NOT use dry heat sterilization or aggressive sterilization fluids (high acid or alkaline levels). This will result in damage and loss of warranty!

For sterilization we recommend CaviCide™ Cleaning and disinfectant solution and Madacide-FD or products with similar composition.

After cleaning, autoclaving, or if you notice squeaking or uneven adjustment, we recommend lubricating the threads to ensure smooth needle depth adjustment.

To do this: unscrew the grip, apply a small amount (a couple of drops) of petroleum jelly to the ends of the thread, and reattach the lower part of the grip.

Lubrication

– We provide a one-year warranty.
– If you purchased the grip from our distributors, please provide the receipt or the warranty card in any form to get the warranty service.
– In case of any trouble contact us via Instagram - @vbi_support or via e-mail - quality@vladblad.com. We will be happy to answer your questions!

The warranty does not apply to сases of:
– External and internal damage caused by violation of the operating instructions;
– Self-repair or modification;
– Improper self-assembly of the grip;
– Change in the color of the coating due to the disinfection process.

Warranty